5 T Komatsu PC55MR
The new PC55MR-5 hydraulic excavators are four machines with tight tail swing radius and swing booms that hug the machine to help with work in tight spaces. The new minis use up to five percent less fuel than their MR-3 predecessors, with no loss of performance or productivity.
- auto decelerator (standard)
- idle shut down (standard)
- 1st proportional line (standard)
- Newly developed hydraulic electronic controls
- selectable working modes
The short-tail PC55MR-5 delivers optimal power and digging speed, even in confined spaces where traditional machines can’t work: yards, road works, demolition sites, sewers, etc. Sturdy and very stable, it guarantees maximum safety and offers complete operator confidence in any working conditions.
A high-definition 3,5” LCD monitor provides excellent visibility. The high-definition LCD panel is less affected by the viewing angle and surrounding brightness, ensuring excellent visibility. Various alerts and machine information are displayed in a simple format. Useful information such as operation records, machine setting and maintenance data are also provided. The operator can easily switch screens.
The wide opening engine bonnets provide a quick access to daily inspection points. The fuel and the hydraulic oil tanks are located under the side bonnet, in a safe and easy to-reach position. In addition, the cab easily tilts back for major maintenance tasks.
Lehnhoff Powertilt unit
The machine features a dedicated piping for power tilt operation and a single effect hydraulic quick coupler line. The Lehnhoff Powertilt installation enhances the versatility of the machine by providing a flexible tool of proven reliability. Piping is routed over the arm for better protection and long lasting design.
The CLSS (Closed-centre Load Sensing System) hydraulic circuit guarantees power, speed and perfect control to all movements, even when simultaneous. The combination of the variable displacement pump and of CLSS allows operators to perform all required movements with maximum efficiency, regardless of the load or rpm.
5 T Komatsu PC55MR
5 T Kubota – PC55MR
|Type of ROPS / FOPS||Canopy|
|Type of tracks||Rubber|
|at rated engine speed||2.400 rpm|
|ISO 14396||29,1 kW / 39,0 HP|
|Displacement (cc)||2.189 cm³|
|Dimensions||Overall length (mm)||5.615|
|Overall height (mm)||2.590|
|Overall width (mm)||1.960|
|Min. ground clearance (mm)||290|
|Hydraulic system||Maximum pump flow||53,5 × 2 + 33,8 + 12 l/min|
|Max. operating pressure||26,5 MPa (265 bar)|
|Bucket digging force (ISO 6015)||3.900 daN (3.980 kg)|
|Arm crowd force (ISO 6015)||2.392 daN (2.440 kg)|
|Drive system||Travel speed (low/high) (km/h)||2,6 / 4,6 km/h|
|Max. drawbar pull (kgf)||4.200 daN (4.280 kgf)|
|Hydraulic motors||2 × axial piston motor|
|Reduction system||Planetary gear|
|Steering control||2 levers with pedals|
|Swing system||Swing speed||9,0 rpm|
|Rotation||Orbital Hydraulic Motor|
|Single ball-bearing ring||internal, induction hardened toothring|
|Blade||Type||Electro-welded, single unit structure|
|Width × height||1.960 × 355 mm|
|Blade, max. lifting height||430 mm|
|Blade, max. digging depth||330 mm|
|Hydraulic system||55 l|
|Fuel tank||65 l|
|OPERATING WEIGHT (APPR.)||Rubber shoes||5.280 kg|
- Road Works
- Demolition Sites
Please read our full Hire Contract Conditions here before hiring from Cono Services.
In addition, please note the following specific conditions:
- Certification is not required to operate this machine, however you must be competent to do so.
- Employers hiring for their employees have a ‘Duty of Care’ responsibility under the Act.
- We aim to deliver within 2 hours of your selected delivery time.
- All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
- Any delivery amount displayed is ‘one-way’ and for one load only. If multiple vehicles are required, we will contact you prior.