Case CX235sr

24 T Case CX235C SR

From digging trenches or swimming pools to maneuvering between houses on residential sites, the CASE CX235C SR excavator allows you to complete more jobs in tight spaces. Quick daily service checks allow for more hours during your work day, increasing your productivity, uptime and potential profit. The Tier 4 certified CEGR technology in the CX235C SR meets current environmental standards and consumes less fuel than previous models.

Share this item:

Productivity

High productivity and maneuverability in restricted conditions is possible due to the compact, counterweight boom placement. Tough conditions are overcome with the Power Boost feature that delivers added muscle. Controls include one-touch idle, and one- or two-position mode selector for the greatest productivity.

Fuel Efficiency

The Tier 4 certified CEGR technology in the CX235C SR meets current environmental standards and consumes less fuel than previous models.

Comfort and Visibility

Engines have greatly reduced noise levels, and all equipment controls are ergonomically designed.

Serviceability

Get more working hours throughout the day with ground-level service and fluid checks. Oil change intervals can be extended to every 500 hours through a high performance filtration circuit. Daily maintenance checks are made easy with ground-level access to key components.

CASE CX235C SR

CASE CX235C SR

Cab height 10 ft 0 in (3 040 mm)
Track overall length 14 ft 8 in (4 470 mm)
Engine Model Isuzu AM-4HK1X
Net horsepower SAE J1349 @ 1800 RPM: 160 hp (119.3 kW)
Net max. torque  SAE J1349 @ 1500 RPM: 458 lb·ft (621 N·m)
Displacement (cc)  317 in3 (5.2 L)
Dimensions Overall length – with attachment 29 ft 3 in (8 920 mm)
Overall height – with attachment  10 ft 5 in (3 180 mm)
Width of upper structure  9 ft 10 in (2 990 mm)
Minimum ground clearance 1 ft 5 in (440 mm)
Hydraulic system Max. rated flow
64.2 gpm (243 L/min)
Boom, arm and bucket
4,975 psi (343 bar)
Pilot pump (Max. capacity) 1 x gear design (7.1 gpm (27 L/min))
Controls
w/ boom/arm holding valve
Draintrain Travel control Dual stage relief/counter balance design
Brakes
Mechanical disc
Service brakes SAHR disc – each motor
Max. high speed 3.1 mph (5.0 kph)
Max. low speed
2.0 mph (3.2 kph)
Drawbar pull
45,187 lbf (201 kN)
Electric Voltage 24 Volts
Alternator rating 50 amp
Batteries 2 x 12 Volt
Operator Environment Air conditioner output 13,492 BTU/hr
Heater output
12,892 BTU/h
Sound level inside cab – ISO6396 70 dBA
Electrical outlet
12 Volt
Ground Pressure Standard operating weight 5.8 psi (0.4 bar)
Attachments Boom 18 ft 8 in (5.70 m)
Arm 9 ft 8 in (2.94 m)

 

Popular Applications

  • Digging Trenches
  • Swimming Pools
  • House Sites
  • Residential Sites

Please read our full Hire Contract Conditions here before hiring from Cono Services.

In addition, please note the following specific conditions:

  • Certification is not required to operate this machine, however you must be competent to do so
  • Employers hiring for their employees have a ‘Duty of Care’ responsibility under the Act
  • We aim to deliver within 2 hours of your selected delivery time.
  • All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
  • Any delivery amount displayed is ‘one-way’ and for one load only. If multiple vehicles are required, we will contact you prior.

Recently Viewed Items

[woocommerce_recently_viewed_products per_page='15']