14 T Knuckleboom Case – CX145C

Unlike traditional excavators with prominent rear counter-weights, the CASE CX145C SR excavator features a compact counterweight and boom placement that minimizes the machine’s work envelope. The small swing radiuses make maneuvering onto difficult, restricted sites a breeze. Daily maintenance on the CX145C SR is made easy with service checks from ground level and extended maintenance intervals. Tier 4 engines meet current environmental standards while lowering fuel consumption.

Share this item:

Productivity

High productivity and maneuverability in restricted conditions is possible due to the compact, counterweight boom placement. Tough conditions are overcome with the Power Boost feature that delivers added muscle. Controls include one-touch idle, and one- or two-position mode selector for the greatest productivity.

Fuel Efficiency

Meet current environmental standards and consume less fuel with Tier 4 certified engines.

Comfort and Visibility

Engines have greatly reduced noise levels, and all equipment controls are ergonomically designed.

Serviceability

Get more working hours throughout the day with ground-level service and fluid checks. Oil change intervals can be extended to every 500 hours through a high performance filtration circuit. Daily maintenance checks are made easy with ground-level access to key components.

CASE CX145C SR

CASE CX145C SR

Cab height 9 ft 2 in (2 800 mm)
Track overall length 11 ft 6 in (3 500 mm)
Engine Model Isuzu AM-4JJ1X
Net horsepower SAE J1349 @ 2000 RPM: 100 hp (74.9 kW)
Net max. torque SAE J1349 @ 1600 RPM: 265 lb·ft (359 N·m)
Displacement (cc) 183 in3 (3.0 L)
Dimensions Overall length – with attachment 25 ft 10 in (7 880 mm)
Overall height – with attachment 9 ft 2 in (2 800 mm)
Width of upper structure 8 ft 2 in (2 490 mm)
Minimum ground clearance 1 ft 5 in (440 mm)
Hydraulic system Max. rated flow
34.1 gpm (129 L/min)
Boom, arm and bucket
4,975 psi (343 bar)
Pilot pump (Max. capacity) 1 x gear design (5.3 gpm (20 L/min))
Blade pump (Max. rated flow)
1x gear design (16.4 gpm (129 L/min))
Draintrain Travel control Dual stage relief/counter balance design
Brakes
Mechanical disc
Service brakes SAHR disc – each motor
Max. high speed 3.5 mph (5.6 kph)
Max. low speed
2.1 mph (3.4 kph)
Drawbar pull
26,078 lbf (116 kN)
Electric Voltage 24 Volts
Alternator rating 50 amp
Batteries 2 x 12 Volt
Operator Environment Air conditioner output 13,492 BTU/hr
Heater output
12,892 BTU/h
Sound level inside cab – ISO6396 70 dBA
Electrical outlet
12 Volt
Ground Pressure Standard operating weight 5.9 psi (0.41 bar)
Attachments Boom 15 ft 2 in (4 630 mm)
Arm 8 ft 2 in (2 500 mm)

 

Popular Applications

  • Restricted Conditions such as:
  • Road and Bridge Work
  • Residential Projects
  • Urban Construction

Please read our full Hire Contract Conditions here before hiring from Cono Services.

In addition, please note the following specific conditions:

  • Certification is not required to operate this machine, however you must be competent to do so
  • Employers hiring for their employees have a ‘Duty of Care’ responsibility under the Act
  • We aim to deliver within 2 hours of your selected delivery time.
  • All deliveries and pickups must be in a safe area to unload, demonstrate the equipment and complete paperwork.
  • Any delivery amount displayed is ‘one-way’ and for one load only. If multiple vehicles are required, we will contact you prior.

Recently Viewed Items

[woocommerce_recently_viewed_products per_page='15']